INDUSTRIAL SOLUTIONS
Ultrasonic Cleaning Solutions and Rinses It is essential to match the correct ultrasonic solution to the cleaning task. Each L&R cleaning solution is blended for a specific cleaning function. There are several factors to be understood in order to optimize both cleaning economies and effectiveness: time, temperature and dilution ratio of the solution, combined with an understanding of the contaminant. By identifying these factors, one can choose the solution that not only does a thorough job, but also minimizes disposal problems. L&R solutions can be utilized in the Ultrasonic Cleaning Systems, holding baths, mechanical parts washers and pre-soak procedures where appropriate.
Solvent Free (SF) Aqueous Solutions
	SF1 Solvent Free Degreaser Concentrate Biodegradable, water-based concentrate Designed to replace solvents for removing oils, soils and light greases from metal and plastic surfaces Dilutable with up to 7 parts water
	SF50 Heavy Duty Solvent Free Degreased Concentrate Biodegradable, water-based, heavy-duty cleaner Removes baked-on carbonaceous soils, oils and greases Can be diluted from 1:20 to 1:5 (5 to 20% by volume) and heated to accelerate cleaning Safe for most metals and plastics
Semi-Aqueous Solutions
	Aqualar Cleaning Solution Concentrate Biodegradable, water-based, alkaline cleaner Dilutable with up to 10 parts water Removes greases, oils and polishing compounds on plastics, glass and most metals Rinses completely with water Do not use on aluminum
	Brite Aluminum Cleaner Concentrate Biodegradable, concentrated, water-based cleaner Removes dirt and oils from aluminum and other surfaces attacked by caustic
	Hydro-Sonic Concentrate Biodegradable, water-based, ammoniated, heavy-duty detergent with co-solvents Removes oils, lapping compounds, waxes, rouges and heavy greases from most metals, glass and other items Rinses freely with water Recommend dilution 1 part to 7 parts water
	Hydro-Sonic Cleaning Concentrate Non-Ammoniated Biodegradable, natural-solvent blend containing citrus oils and surfactants without toxic solvents or caustic Dilutable 1 part to 7 parts water Excellent for cleaning heavy soils and grease from most metals and plastics Can be heated to 180 degrees F Rinses freely with water
	Industrial General Purpose Cleaner Concentrate Non-Ammoniated Biodegradable concentrate Dilutable with up to 20 parts water Removes water-soluble contaminants, including light oils, dirt, dust, light buffing compounds from glass, most plastics and metals Do not use on aluminum
	PowerClean Investment Remover Biodegradable, ready-to-use, water-based, alkaline cleaner Removes investment residue from most types of metal castings Can be used directly in the ultrasonic tank
	PrepClean Buffing Compound Remover Concentrate Biodegradable super concentrate used at 3 to 20% concentration with water Removes most buffing compounds without discoloration of metal Can be heated in an ultrasonic machine up to 180 degrees F to enhance cleaning Contains no film-forming corrosion inhibitors so parts can be plated without an additional cleaning Do not use on aluminum
	PrepClean Plus Buffing Compound Remover Concentrate Same as PrepClean Buffing Compound Remover above but with a nonferrous metal corrosion inhibitor to protect parts to be stored after cleaning.
	Ultrasonic Blind Cleaner Concentrate Biodegradable, water-based formulation for use in an ultrasonic cleaning machine Removes common dirt and grime normally found on household and office blinds, light lenses and filters The recommended dilution is 1/2 to 1 1/2 ounces per gallon of warm water Water rinsable and environmentally friendly
Petroleum Based Cleaning Solutions
	#112 Ammoniated Ultrasonic Instrument Cleaning Solution Natural ammonia soap in a petroleum naptha base Cleans ferrous and nonferous precision instruments without damage to the most delicate parts Removes oils, greases, asphalt, tars and other contaminants For use in conjunction with the L&R instrument rinsing solutions listed below
	#222 Non-Ammoniated Ultrasonic Instrument Cleaning Solution Formulated for cleaning operations where ammonia would not be suitable Produces the same brilliant results as the #112 when used in an ultrasonic stystem in conjunction with L&R rinsing solutions
	Power NoFome Instrument Cleaning Solution Blend of natural ammonia soap and auxillary solvents in a petroleum naptha base Quickly dissolves grease and hardened oils from the most minute parts Ideal for cleaning parking meters For use in conjunction with the L&R rinsing solutions
	Instrument Rinsing Solution Blend of petroleum-based solvents Removes residues left from L&R cleaning solutions to ensure a totally clean surface Contains no chlorinated solvents or other harmful ingredients Safe on most plastics
	Ultrasonic Instrument Rinsing Solution Blended petroleum solvent product for use in an ultrasonic machine Dries quickly and leaves no spotting or streaking Test on plastic before using
	PowerClean Heavy-Duty Jewelry Cleaner Concentrate Non-Ammoniated Biodegradable, heavy-duty cleaner designed to clean precious metals where an ammoniated product is not suitable Can be diluted with up to ten parts of water and heated up to 180 degrees F when used with ultrasonics Do not use on aluminum
Material Safety Data Sheets (MSDS)
For information and pricing e-mail :  sales@wescottcompany.com