MDM1000/MDM2000 Metal Plate Marking System

MDM1000 / MDM2000

METAL DOT MATRIX TECHNOLOGY,
INDUSTRIAL MARKING SOLUTION

Embossing too expensive ??
Low volume, but need automation ??
Need different font sizes ??

CIM USA and Wescott Company have the solution

The MDM 1000 / MDM2000 series is an automatic metal plate marking solution at 50% lower cost compared to an automatic embossing solution.

The MDM series is the ideal solution for end-users with low plate volumes, yet wanting an automated marking process.

Reliable stylus stamping for logos, Windows fonts, and special characters of all sizes

Easy manual or automatic loading and unloading.

New innovative single point access manual feed solution.

Near end input/near full output hopper plate sensors for continuous production.
Latest generation electronics with FLASH memory technology (accessible via external service port).
Stamps special characters such as country specific characters and symbols.
Stamps up to two logos at a time in addition to text. Variable logo orientation.

Available options :	Output hopper : side eject or FIFO elevator (first in/first out)
COMMUNICATION - Communication Interface	Serial RS232 port
COMMUNICATION - Protocols:	CIM, Xon-Xoff and Multiembosser
Dot Density :	200 DPI
Electrical requirements :	117 V / 60 Hz - 230 V / 50 Hz
Fonts :	Standard Windows fonts including special characters and symbols
>Input hopper capacity	MDM1000 : manual feeding MDM2000 : 250 plates (0.016")variable dimensions
Logo dimensions	max area about 13 square inches
Logos	Up to 2 at a time, resident in equipment
Output hopper capacity	MDM 1000 : manual feeding MDM 2000 : side eject or FIFO elevator (250 plates)
Plates dimensions :	Width : min 1.2" - max 4.5" Height : min 0.826" - max 3.5" Thickness : 0.016" - 0.035"
Stamping area :	Full plate except 0.039" from the top and left/right edges and 0.275" from the bottom edge. Avoid edges to not damage the stylus.
Stamping pressure :	Adjustable depending on material stamped
Stylus:	Widia
Marking force in libres :	110 lbs
Marking speed :	About 50 dots per second
MEMORY and DATA Data format :	50 fields of 80 characters each (Name, Fixed data, Counters, etc.)
MEMORY and DATA - Software/Firmware	PC application proprietary software. Automatic date field;plate archive; DBIII, DBIV, Excel, MS Access file compatibility. Self diagnostic, automatic repetition of faulty plate personalization, clearable and non-clearable counters, set-up procedures (via external keyboard)
MEMORY and DATA - Storable formats :	10 with formatted downloading
Miscellaneous	2-line by 40 character LCD Display for diagnostic visualization. Lithium back-up battery (warning of low battery level on LCD) Security operation with key lock. Emergency stop RED button. Machine state indicator lights, LCD edit (via external keyboard)
Operating Temperature	5C - 40C / 41F - 104F
Performance :	Depending on font and size (e.g.: ht 0.236: = 1 character/4 seconds)
Physical dimensions (WxDxH) :	MDM1000/MDM2000: 24.75"x29.25"x15"
Weight :	MDM1000/ MDM2000: 123 lbs.
Power consumption :	100 watt

For information and pricing call 1-800-766-1066
or e-mail : sales@wescottcompany.com
or
Wescott Company
4800 A Colley Avenue
Norfolk, VA 23508
Toll Free: 1-800-766-1066
Phone: (757) 489-2401
Fax: (757) 489-2403

[ Back ] [ Home Page ]